Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Managing trunks
349Adding a Tie or Access trunk group
12
Before you start
Before you can administer any trunk group, you must have one or more circuit
packs of the correct type with enough open ports to handle the number of trunks
you need to add. To find out what circuit packs you need, refer to the DEFINITY
ECS System Description.
Tip:
In the DID/Tie/ISDN Intercept Treatment field on the Feature-Related
System parameters screen, enter
attd. Incoming calls to invalid extensions
will be routed to the attendant.
Instructions
As an example, let’s add a two-way tie trunk group that supports voice and
voice-grade data.
To add the new tie trunk-group:
1. Type
add trunk-group next and press RETURN.
The Trunk Group
screen appears. The system assigns the next available
trunk group number to this group. In our example, we’re adding trunk
group 5.
2. In the Group Type field, type
tie.
This field specifies the kind of trunk group you’re creating.
Page 1 of X
TRUNK GROUP
Group Number: 5__ Group Type: tie CDR Reports: y
Group Name: Outside calls COR: 85_ TN: 1__ TAC: 105_
Direction: two-way_ Outgoing Display? n Trunk Signaling Type: ____
Dial Access? n Busy Threshold: 99_ Night Service: 1234
Queue Length: 0__ Incoming Destination: ____
Comm Type: voice Auth Code? n
Trunk Flash? n
BCC: 0
TRUNK PARAMETERS
Trunk Type (in/out): wink/wink___ Incoming Rotary Timeout(sec): 5_
Outgoing Dial Type: tone_____ Incoming Dial Type: tone____
Disconnect Timing(msec): 500_
Digit Treatment: __________ Digits: ____
Expected Digits:__ Sig Bit Inversion: none
Analog Loss Group: ___ Digital Loss Group: ___
Incoming Dial Tone? y
Disconnect Supervision - In? y Out? n
Answer Supervision Timeout: 0__ Receive Answer Supervision? y