Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
748ISDN trunk group
17
Codeset to Send Display
This field defines the codeset for sending the information element for Display.
The value depends on the type of switch to which the user is connected.
Codeset to Send National IEs
This field defines the codeset for sending the information element (IE) for national
IEs. National IEs include all IEs previously sent only in code set 6 (such as DCS
IE). Now these national IEs, including Traveling Class Marks (TCMs) and
Lookahead Interflow (LAI), can be sent in code set 6 or 7. The value depends on
the type of switch the user is connected to.
NOTE:
A Traveling Class Mark (that is, the user’s FRL or the user’s trunk group
FRL) is passed between tandem nodes in an ETN in the setup message only
when the Service Type field is
tandem. It then is used by the distant tandem
switch to permit access to facilities consistent with the originating user’s
privileges.
Valid entries Usage
none
Enter none if you do not want the system to collect Advice of
Charge information for this trunk group.
automatic
Enter automatic only if your public network sends Advice of
Charge information automatically.
end-on-
request
Enter end-on-request if DEFINITY ECS must request charge
information with each call, and you want to receive only the
final call charge.
during-on-
request
Enter during-on-request if DEFINITY ECS must request
charge information with each call, and you want charges to
display during and at the end of a call.
Valid entries Usage
0
CCITT
6
Any other than CCITT or System 85 R2V4, 4E11
7
System 85 R2V4, 4E11
Valid entries Usage
6
Other types.
7
System 85 R2V4, 4E11, or newer switch types