Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
632Feature-Related System Parameters
17
Originating a multimedia call with the multimedia multi-address access code will
originate a call according to the Default Multimedia Parameters selected on the
System Parameters Features screen.
Multimedia Parameter Access Code
This FAC can be entered by any voice station to indicate to the DEFINITY ECS
that you want to initiate a multimedia mode call with a specific bearer capability.
This FAC would be followed by a 1 or 2 to indicate the following parameter
selections respectively: 2x64 (unrestricted initial system default), 2x56
(restricted).
Feature-Related System Parameters
This screen implements system parameters associated with various System
features.
NOTE:
This screen used to contain Call Coverage and Call Forwarding parameters.
These fields have been moved to a new screen, which you can access with
the command
change system-parameters coverage-forwarding.
Field descriptions for page 1
Screen 85. Feature-Related System Parameters screen
change system-parameters features Page 1 of 10
FEATURE-RELATED SYSTEM PARAMETERS
Self Station Display Enabled? n
Trunk-to-Trunk Transfer? none
Automatic Callback - No Answer Timeout Interval (rings): 4_
Call Park Timeout Interval (minutes): 10
Off-Premises Tone Detect Timeout Interval (seconds): 20_
AAR/ARS Dial Tone Required? y
Music/Tone On Hold: music Port: _______
Music (or Silence) On Transferred Trunk Calls: all
DID/Tie/ISDN Intercept Treatment: attd
Messaging Service Adjunct (MSA) Connected? y
Internal Auto-Answer of Attd-Extended/Transferred Calls? y
Automatic Circuit Assurance (ACA) Enabled? y
ACA Referral Calls: local
ACA Referral Destination: ________
ACA Short Holding Time Originating Extension: ______
ACA Long Holding Time Originating Extension: ______
Abbreviated Dial Programming by Assigned Lists:
Auto Abbreviated/Delayed Transition Interval(rings):
Protocol for Caller ID Analog Terminals: Bellcore