Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
760ISDN trunk group
17
(for called/busy only) or d for the QSIG Global Networking Supplementary
Services Protocol. When the Supplementary Service Protocol field is
e (DCS with
Rerouting), only values of
y and n are permitted.
NOTE:
If name information is not administered for the calling station or the
connected/called/busy station, the system sends the extension number in
place of the name.
Send UCID
Specifies whether or not the trunk should transmit Universal Call IDs. The valid
entries are
y and n.
US NI Delayed Calling Name Update
Administrable if, on the System-Parameters Customer-Options screen, the
ISDN-PRI field is
y, and on the Trunk Group screen, the Carrier Medium field is
either
PRI/BRI or ATM, and the Supplementary Service Protocol field is a. This
field provides display updates to the terminating phone for delayed calling party
name provided by the network,
UUI IE Treatment
Specifies whether the user Information Element (IE) is shared. Enter
shared if the
trunk is connected to a DEFINITY 6.3 (or later) switch. Enter
service-provider if
the trunk is connected to a pre-DEFINITY 6.3 switch or service provider
functionality is desired.
Wideband Support
Specifies whether Wideband Switching is supported by this trunk group. Valid
entries are
y or n. For ISDN trunk groups containing ISDN-BRI interfaces, the
only valid entry is
n. Otherwise you can administer this field only if the Wideband
Valid entries Usage
y
If calling name information is received after the incoming call
has been delivered to the terminating phone, there is a display
update.
NOTE:
BRI trunks do not support this value.
n
If calling name information is received after the incoming call
has been delivered to the called phone, there is no display
update to the terminating phone.