Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
828Multifrequency-Signaling-Related System Parameters
17
Private Group II Permissions and Public
Interworking
Convert First Digit End-of-ANI To
Collect All Digits Before Seizure
This field appears only when Outgoing Call Type is
group-ii-mfc or mfe.
Request Incoming ANI (non-AAR/ARS)
This field only applies if the incoming call via the R2-MFC trunk is terminating to
a local station on this PBX.
Valid entries Usage
y/n
If y, DEFINITY ECS:
— Sends the category for MFC ANI for the COR of the
originating party for non-private-MFC-trunk to
MFC-private-trunk calls.
— Sends the Group II category received over the incoming
private trunk as the outgoing Group II category on tandem
private MFC calls.
— Applies MFC group II-CPC termination restrictions on
incoming MFC private trunk calls.
— Checks station permissions if you call forward off-net.
Valid entries Usage
0
to 9 Enter the digit used when the incoming initial end-of-ani or
end-of-dial MF signal is converted on a per-switch basis.
Valid entries Usage
y
The system collects all the digits before seizing the trunk and
the ANI Req field on the AAR and ARS Digit Conversion
Table does not apply.
n Enter n to control ANI collection via the ARS screens.
Valid entries Usage
y/n
If
y, ANI should be requested on incoming R2-MFC calls.