Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Setting up telecommuting
304Training users
10
4. Dial 12345678 and press #.
This is the new security code. Security codes can be 4- to 8-digits long.
5. Dial
12345678 and press #.
This is to confirm your new security code. You hear the confirmation tone.
NOTE:
If you cannot change your security code, Manager 1 can clear the
problem using the Clear Audit Summary command.
Interrupting the command sequence for
personal station security codes
To interrupt the command sequence for personal station security codes:
1. To interrupt the command sequence before step 3, choose one of these
options:
■ Hang up or press the disconnect or recall button before hearing
intercept tone in step 3.
The system does not log an invalid attempt. You must restart the
process at step 1.
■ Type * before the second # in step 3.
You must begin the change sequence at the point of entering your
extension in step 2. (You should not enter the FAC again.)
■ Type * after the FAC has been entered and before the final #.
You must restart the process at step1.
2. To interrupt the command sequence after step 3, type
* in steps 4 or 5, you
must begin the change sequence at the point of entering the new SSC in
step 4.
If you hear intercept tone in any step, the command sequence has been
invalidated for some reason and you must restart the process at step 1.
If you hear intercept tone after step 3, the system logs an invalid attempt via
the Security Violation Notification (SVN) feature. This is true even if you
attempt to interrupt the change sequence with an asterisk.