Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Managing announcements
371Restoring announcements
13
Restoring announcements
You can restore announcements from system memory to an announcement circuit
pack. Your system memory is a tape, disk, or memory card, depending on your
system.
If you have a duplicated system, you system always restores the announcements
located on the active processor.
Instructions
Let’s restore announcements from our system memory (stored on a disk) to the
integrated announcement circuit pack on our system.
To restore announcements from system memory to the integrated announcement
circuit pack:
1. Type
restore announcements disk and press RETURN.
Let’s restore announcements from system memory to an announcement circuit
pack that has built-in memory. We know that the announcement circuit pack is
located at 01B18:
1. Type
restore announcements from cabinet 01. carrier B, slot 18 and
press
RETURN.
2. Press
ENTER to restore announcements.
Fixing problems
If the system crashes or there is a processor interchange during restore
announcements, the restore fails and there is no valid announcement on the circuit
pack. Repeat the process when the system is operating properly.
Problem Possible causes and solutions
You receive
error code
E28
You do not have an integrated announcement circuit pack in the system.
Refer to your DEFINITY ECS System Description for more information.
You receive
error code
E31
A call is connected to the announcement on the circuit pack and the port is
busy. Wait for the call to disconnect and try restore announcements again.