Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Enhancing system security
320Using access security gateway
11
Instructions
To set up access security gateway:
1. Type
change login xxxx and press RETURN, where xxxx is the
alphanumeric login ID.
The Login Administration
screen appears.
2. In the Password of Login Making Change field, type your password.
3. In the Access Security Gateway field, type
y.
When set to
y, the Access Security Gateway Login Administration screen
(page 2) appears automatically.
4. Either:
■ Set the System Generated Secret Key field to:
■ y for a system-generated secret key, or
■ n for a secret key to be entered by the administrator, or
■ In the Secret Key field, enter your secret key.
Be sure to remember your secret key number.
5. All other fields on page 2 are optional.
6. Press
ENTER to save your changes.
7. Type
change system-parameters security and press RETURN.
The Security-Related System Parameters
screen appears.
LOGIN ADMINISTRATION
Password of Login Making Change:
LOGIN BEING ADMINISTERED
Login’s Name:xxxxxxx
Login Type:
Service Level:
Disable Following a Security Violation?
Access to INADS Port? _
LOGIN’S PASSWORD INFORMATION
Login’s Password:
Reenter Login’s Password:
Password Aging Cycle Length (Days):
LOGOFF NOTIFICATION
Facility Test Call Notification? y Acknowledgment Required? y
Remote Access Notification? y Acknowledgment Required? y
ACCESS SECURITY GATEWAY PARAMETERS
Access Security Gateway? n