Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Enhancing system security
315Adding logins and passwords
11
Instructions
We will add the login
angi3 with the password b3stm0m. We also will require the
user to change their password every 30 days.
To add new logins and passwords:
1. Type
add login angi3 and press RETURN.
The Login Administration
screen appears.
The Login’s Name field shows the name you typed in the
add command.
2. In the Password of Login Making Change field, type your superuser
password.
3. In the Disable Following a Security Violation field, type
y to disable this
login following a login security violation.
This field appears only if on the Security-Related System Parameters
screen, SVN Login Violation Notification field is
y.
4. In the Login’s Password field, type
b3stm0m.
The password does not appear on the screen as you type.
5. In the Reenter Login’s Password field, retype
b3stm0m.
6. In the Password Aging Cycle Length (Days) field, type
30.
This requires the user to change the password every 30 days.
7. Press
ENTER to save your changes.
Now you need to set the permissions for this new login.
LOGIN ADMINISTRATION
Password of Login Making Change:
LOGIN BEING ADMINISTERED
Login’s Name: angi3
Login Type:
Service Level:
Disable Following a Security Violation?
Access to INADS Port? _
LOGIN’S PASSWORD INFORMATION
Login’s Password:
Reenter Login’s Password:
Password Aging Cycle Length (Days): 30
LOGOFF NOTIFICATION
Facility Test Call Notification? y Acknowledgment Required? y
Remote Access Notification? y Acknowledgment Required? y
ACCESS SECURITY GATEWAY PARAMETERS
Access Security Gateway? n