Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
735IP Trunk Configuration Manager
17
QoS dialog box
Use the Quality of Service (QoS) dialog box to configure the quality of service
options for the DEFINITY ECS connections to remote sites.
Error Messages Shows you that the logging of error or warning messages into the
Windows NT Event Viewer is on. Display-only.
When this option is on, you can use the Windows NT Event Viewer
to view the reported errors and warnings. (In this release, the Log
Properties option is not available for this log.)
Performance
Statistics
Allows you to turn logging of QoS (quality of service) statistics on
or off. The statistics are logged into the Windows NT Performance
Monitor. (In this release, the Log Properties option is not available
for this log.)
Log Properties Allows you to set the maximum log file size.
Valid values:
1 to 100 (MB).
When a log file reaches this setting, the DEFINITY ECS
application will create a new log file. In addition, for the CDR log
only, this properties window allows additional CDR file
management. If this feature is checked, then a copy of the CDR file
is maintained. This allows a remote client to retrieve the CDR
records from the DEFINITY ECS application periodically, without
affecting the operation of the application. This feature makes two
additional parameters available:
■ Write file every <n> minutes: Specifies how often the copy
file is refreshed. If the file doesn’t exist, then it is created.
Valid values:
1 to 60.
■ Location: Specifies the directory where the copy (alternate)
CDR file is stored.
Parameter Description
Continued on next page