Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
669Feature-Related System Parameters
17
Station Tone Forward Disconnect
Tone Forward Disconnect applies to any station other than one administered as a
data endpoint, an attendant console, a BRI phone, an auto answer, or as an
Outgoing Call Management (OCM) agent.
Level of Tone Detection
For the most part, this option is no longer required in today’s switching
environment. It may be useful if your users are having difficulty placing outgoing
calls due to inaccurate detection of network dial tone.
Charge Display Update Frequency (seconds)
This applies only if you use Advice of Charge or Periodic Pulse Metering with
display functions.
Valid entries Usage
busy
intercept
silence
When a station is the last party remaining off-hook on a call,
that station receives the indicated tone or silence until that
station is placed on-hook, or until the tone has played for 45
seconds and is followed by silence.
Valid entries Usage
broadband
This is the least exact of the levels of tone detection. If the
switch detects any tone at all, it interprets this as dial tone.
medium
The switch interprets any tone which has a continuous "on"
period of longer than 1 second as dial tone. Otherwise, the
switch accepts whatever the tone detector circuit pack reports.
precise The switch accepts whatever the tone detector circuit pack
reports.
Valid entries Usage
10
–60 The amount of time (in seconds) between charge-display
updates. Frequent display updates may have considerable
performance impact. If the duration of a call is less than the
Charge Display Update Frequency, the display will not
automatically show charge information. To see charge
information for a call, the user must have a disp-chrg button
and must press the button before the call drops.