DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Managing multimedia calling
239Multimedia Call Handling
9
■ Call Vector
— Multimedia (optional)
■ Feature Access Codes
— Basic Mode Activation (p.5)
— Enhanced Mode Activation (p.5)
— Multimedia Call Access Code (p.5)
— Multimedia Data Conference Activation & Deactivation (p.5)
The Multimedia Data Conference Deactivation FAC must be entered after
you are active on a multimedia call. To enter the FAC:
1. Select TRANSFER
2. Receive a dialtone
3. Dial the FAC
4. Receive a confirmation tone
5. Re-select the call appearance for the held multimedia call.
— Multimedia Multi-Address Access Code (p.5)
— Multimedia Parameter Access Code (p.5)
■ DS1 Circuit Pack (ESM Only)
— Bit Rate=2.048
— Line Coding=hdb3
— Signaling Mode=isdn-pri
— Connect=pbx
— Interface=network
— Country Protocol=1
— CRC=y
— MMI Cabling Board
■ Signaling group (ESM Only)
— Primary D-Channel