Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
902Station
17
Per Station CPN - Send Calling Number
Port
Enter 7 characters to specify a port, or an x. If this extension is registered as an IP
softphone endpoint, this field will display S00000.
For DCP sets, the port can only be assigned once. ISDN-BRI provides a
multipoint configuration capability that allows a previously assigned port
to be specified more than once as follows: 2 stand-alone voice endpoints, 2
stand-alone data endpoints, or 1 integrated voice and data endpoint.
However, for the following cases, the port is assumed to be fully assigned:
— Maximum number of users (currently 2) are assigned on the port.
— One of the users on the port is a fixed TEI station.
6
HLL
7
HLH
8
LHL
Valid entries Usage
y
All outgoing calls from the station will deliver the Calling
Party Number (CPN) information as “Presentation Allowed.”
n
No CPN information is sent for the call.
r
Outgoing non-DCS network calls from the station will
deliver the Calling Party Number information as
“Presentation Restricted.”
blank The sending of CPN information for calls is controlled by
any administration on the outgoing trunk group the calls are
carried on.
Valid entries Usage
01
through 44 (G3r) First and second numbers are the cabinet number
01 through 03 (G3si)
A through E Third character is the carrier
01 through 20 Fourth and fifth characters are the slot number
01 through 32 Sixth and seventh characters are the circuit number
x
Indicates that there is no hardware associated with the
port assignment. Use for IP softphones.
Valid entries Usage