Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
481Announcements/Audio Sources
17
Type
Enter the type of announcement you want to assign to this extension number.
If you enter integrated or integ-rep, complete the Protect, Rate, and Port fields. If
you enter analog, ds1-fd, ds1-sa, ds1-ops, or aux-trunk, complete QLen (if Q is
y)
and Port.
COR
Valid entries Usage
analog
Use to play announcements from an external device for a
specific period and hang up when finished. When the device
hangs up, the caller hears a click. Connects to switch through
analog port.
analog-m
Use for continuous playing music or audio source from an
external announcement device.
analog-fd
Use for repeating (“barge-in”) announcements from an
external device.
aux-trunk
auxiliary trunk, use with an external announcement device with
a 4-wire “aux” interface
aux-trk-m
ds1-fd
Assigned to DS1 ports on circuit packs. Recommended for
interfacing for CONVERSANT Line Side T1 ports when
CONVERSANT is used. Callers do not hear a click when the
device hangs up. Provides a disconnect to stop playback when
the announcement is done.
ds1-ops
Callers do not hear a click when the device hangs up.
ds1-sa
Callers do not hear a click when the device hangs up. Provides
a disconnect to stop playback when the announcement is done.
integrated
Stored internally on the switch on a special integrated
announcement circuit pack. Use for general announcements
and VDN of Origin Announcements.
integ-rep integrated repeating
Valid entries Usage
0
– 95 Enter the class of restriction (COR) you want associated with
this announcement