Lucent Technologies 8.2 Security Camera User Manual


  Open as PDF
of 1707
 
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Managing data calls
413Administered Connection
15
2. On the DS1 Circuit Pack screen, administer all fields. Refer to ‘‘DS1
Circuit Pack’’ on page 599 for more information. (Use with switch node
carriers.)
3. On the Access Endpoint screen, administer all fields. Refer to ‘‘
Access
Endpoint’’ on page 467 for more information.
4. Choose one of the following trunk groups and administer all fields. Refer to
‘‘
ISDN trunk group’’ on page 738 and ‘‘Trunk Group’’ on page 967 for
more information.
ISDN-BRI
ISDN-PRI
Tie
5. On the Class of Restriction screen, administer all fields. Refer to ‘‘
Class of
Restriction’’ on page 520 for more information.
6. On the Class of Service screen, administer all fields. Refer to ‘‘
Class of
Service’’ on page 532 for more information.
7. On the Dial Plan Record screen, administer the Local Node Number field
with a number from 1-63 that matches the DCS switch node number and
the CDR node number. Refer to ‘‘
Dial Plan Record’’ on page 593 for more
information.
8. On the Administered Connection screen, administer all fields. Refer to
‘‘
Administered Connection’’ on page 471 for more information.
9. On the Station screen, assign one button as ac-alarm. Refer to ‘‘
Station’’ on
page 882 for more information.
10. On the Attendant Console screen, assign one button as ac-alarm. Refer to
‘‘
Attendant Console’’ on page 484 for more information.
Interactions
Abbreviated Dialing
Use Abbreviated Dialing entries in the
Destination field. Entries must
comply with restrictions.
Busy Verification of Stations and Trunks
This feature does not apply to access endpoints because they are used only
for data.
Call Detail Recording
For an AC that uses a trunk when CDR is active, the origination extension
is the originator of the call.