Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
928System Parameters Customer-Options
17
Duration (msec)
There is one dynamic Duration field associated with each of the 15 Tone
(Frequency/Level) fields on each screen page. Initially, when Tone is blank, this
field does not appear. However, when a non-blank value other than
goto is entered
in a Tone field, the associated Duration field appears, and must be used to specify
the duration (in milliseconds) of the specified tone.
Step
There is one dynamic Step field associated with each of the 15 Tone
(Frequency/Level) fields shown on a screen page. Initially, when Tone is blank,
this field does not appear. However, when
goto is entered in a Tone field, the
associated Step field appears, and must be used to specify the cadence step to
begin repeating from
System Parameters
Customer-Options
This screen allows access to features purchased by customers. An authorized
Lucent Technologies representative sets these parameters for you.
Field descriptions for page 1
Screen 193. System Parameters Customer-Options
Valid entries Usage
50
through 12750 in
increments of 50
To describe the duration of each administered tone.
Valid entries Usage
Cadence Step (1–14) Beginning the repeated sequence for a “goto” entry.
Page 1 of 5
OPTIONAL FEATURES
G3 Version: V6 Maximum Ports: 300
Abbreviated Dialing Enhanced List? n CAS Main? n
Access Security Gateway? n Cvg Of Calls Redirected Off-net? n
Analog Trunk Incoming Call ID? n DCS (Basic)? n
A/D Grp/Sys List Dialing Start at 01? n DCS Call Coverage? n
Answer Supervision by Call Classifier? n DCS with Rerouting? n
ARS? y DEFINITY Network Admin? n
ARS/AAR Partitioning? y DS1 MSP? n
ASAI Interface? n
ASAI Proprietary Adjunct Links? n Emergency Access to Attendant? y
Page 1 of 5
OPTIONAL FEATURES
G3 Version: V8 Maximum Ports: 100
Location: 1 Maximum XMOBILE Stations: 0
Maximum H.323 Trunks: 0
Maximum H.323 Stations: 0
Maximum IP SoftPhones: 0