Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Routing outgoing calls
185Routing with multiple locations
8
AAR or ARS must be administered.
■ For AAR, verify that either the Private Networking field or the Uniform
Dialing Plan field is y on the System-Parameters Customer-Options screen.
■ For ARS, verify that the ARS field is y on the System-Parameters
Customer-Options screen.
Each cabinet in a switch must be assigned a location number. Refer to the
maintenance information for your switch for more information.
Instructions
For example, let’s use ARS to set up local call routing for two switch locations.
Our Chicago switch is assigned to location 1, and our New York switch is
assigned to location 2.
Our example shows a simple local dialing plan. Each location already contains
location-specific routing tables. We’ll use route pattern 1 for local service calls
and route pattern 2 for local HNPA calls in the Chicago location.
Tip:
Create location-specific routing by assigning different route patterns for
each location.
To define local calls for switches in Chicago and New York:
1. Type
change ars analysis location 1 and press ENTER.
The AAR and ARS Digit Analysis Table
screen for location 1 appears.
2. Type the information for local dialed strings and service calls in each row
on the form.
change ars analysis Page 1 of X
ARS DIGIT ANALYSIS TABLE
Location: 1___ Percent Full: ___
Dialed Total Route Call Node ANI
String Min Max Pattern Type Num Reqd
2________________ 7 7 2____ hnpa ___ n
3________________ 7 7 2____ hnpa ___ n
4________________ 7 7 2____ hnpa ___ n
411______________ 3 3 1____ svcl ___ n
5________________ 7 7 2____ hnpa ___ n
555______________ 7 7 deny_ hnpa ___ n
6________________ 7 7 2____ hnpa ___ n
611______________ 3 3 1____ svcl ___ n
7________________ 7 7 2____ hnpa ___ n
8________________ 7 7 2____ hnpa ___ n
811______________ 3 3 1____ svcl ___ n
9________________ 7 7 2____ hnpa ___ n