Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Handling incoming calls
141Setting up night service
7
2. In the EXT Alert Port (TAAS) field, type 01A0702.
Use the port address assigned to the external alerting device.
3. Press
ENTER to save your changes.
Setting up external alerting night service
Calls redirected to the attendant via Call Forwarding or Call Coverage will not go
to the Listed Directory Number (LDN) Night Station. If there is no night station
specified, and the TAAS bell is being used, these calls ring the TAAS bell. A call
following the coverage path rings the TAAS bell for the number of times indicated
in the Coverage Don’t Answer Interval for Subsequent Redirection (Rings) field.
If not answered, the call proceeds to the next point in the station’s coverage path.
If the call was sent to the Attendant by Call Forwarding, it continues to ring the
TAAS bell.
When night service is enabled, and there is a night service destination on the LDN
screen, calls covering to the attendant attempt to ring the night destination instead
of the attendant position even if the handset is plugged in.
CONSOLE PARAMETERS
Attendant Group Name: Operator
COS: 0 COR: 0
Calls in Queue Warning: 5 Attendant Lockout? y
Ext Alert Port (TAAS): 01A0702
CAS: none
SAC Notification? n Night Service Act. Ext.:
IAS (Branch)? n IAS Tie Trunk Group No.:
IAS Att. Access Code: Alternate FRL Station:
Backup Alerting? n DID-LDN Only to LDN Night Ext? n
TIMING
Time Reminder on Hold (sec): 10 Return Call Timeout (sec): 10
Time in Queue Warning (sec):
INCOMING CALL REMINDERS
No Answer Timeout (sec): 20 Alerting (sec): 40
Secondary Alert on Held Reminder Calls? y
ABBREVIATED DIALING
List1: group 1 List2: List3:
COMMON SHARED EXTENSIONS
Starting Extension: Count: