Lucent Technologies 8.2 Security Camera User Manual


  Open as PDF
of 1707
 
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
853PRI Endpoint
17
Extended Group Number
This field appears only when the Group Call Pickup field is set to
flexible on the
Feature-Related System Parameters screen. The extended group is a collection of
pickup groups that can answer calls from other pickup groups in the same
extended group.
Ext
Enter the extension assigned to a station.
Name
This display-only field shows the name assigned to the above extension number
when the users and their associated extensions were administered.
PRI Endpoint
This screen administers PRI Endpoints for the Wideband Switching feature.
NOTE:
A PRI Endpoint with a width greater than 1 may be administered only if the
Wideband Switching feature has been enabled on the System-Parameters
Customer-Options screen.
A PRI Endpoint is an endpoint application connected to line-side ISDN-PRI
facilities and has standard ISDN-PRI signaling interfaces to the system. For
information on endpoint applications connected to line-side non-ISDN T1 or E1
facilities, see ‘‘
Access Endpoint’’ on page 467 in this module.
A PRI Endpoint is defined as 1–31 adjacent DS0s/B-channels, addressable via a
single extension, and signaled via a D-channel (Signaling Group) over a standard
T1 or E1 ISDN-PRI interface.
Valid entries Usage
1
-100 (G3si
and G3csi)
1-400 (G3r)
Enter the extended group number or blank.
Valid entries Usage
An extension number. A VDN cannot be assigned to a Call Pickup group.