Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Features and technical reference
1302Calling Party/Billing Number
20
Interactions
■ Multiquest Flexible Billing
Do not use a Service/Facility with the Facility Type field set to 2 or 3. NSF
processing is not performed for Facility Type 2. An NSF is not included in
the outgoing SETUP message for Facility Type 3.
■ Time-of-Day Routing
Any Time-of-Day Routing administration that affects routing preference
also affects Call-by-Call Service Selection. Use Time-of-Day Routing to
vary the IXC based on the time of day and day of the week.
Calling Party/Billing Number
Calling Party Number/Billing Number (CPN/BN) allows the system to transmit
CPN/BN information to an ISDN-PRI trunk group. The CPN is the calling party’s
telephone number. BN is the calling party’s billing number. The CPN/BN may
contain international country codes. CPN/BN is used with an adjunct application.
Brief Description
The following list shows the screens used to administer CPN/BN and the fields
you must use on each screen:
■ ISDN trunk group
— All fields including Per Call CPN/BN
■ ISDN Numbering — Public/ Unknown or ISDN Numbering — Private
—All
■ Processor Channel Assignment (Refer to the DEFINTY services
documentation for information about this screen.)
—All
On the ISDN Trunk Group screen, assign all fields needed to provide an
ISDN-PRI link between the system and the adjunct. Set the Per Call CPN/BN
field to
can-only, can-pref, bn-only, or bn-pref as required to make sure that
CPN/BN information is sent with a call-offered event report to the adjunct.
On the Processor Channel screen, assign all fields for one data link. The system
can support only one interface.