Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Introduction to the DEFINITY system
25System-wide settings
2
System-wide settings
There are some settings that you enable or disable for the entire system, and these
settings effect every user. You may want to look over the various System
Parameters screens and decide which settings best meet the needs of your users.
To see a list of the different types of parameters that control your system, type
display system-parameters and press HELP. You can change some of these
parameters yourself. Type
change system-parameters and press HELP to see
which types of parameters you can change. In some cases, a Lucent representative
is the only person who can make changes, such as to the System Parameters
Customer-Options screen.
This chapter offers a few examples of how you establish these system-wide
settings. The Screen reference
contains explanations of each of the system
parameters screens, and how to use them.
Changing feature parameters
You can modify the system parameters that are associated with some of the system
features. For example, you can use the system parameters to allow music to play if
callers are on hold or to allow trunk-to-trunk transfers on the system.
Generally, Lucent sets your system parameters when your system is installed.
However, you can change these parameters as your organization’s needs change.
For example, let’s say that you are told that the number of rings between each
point for new coverage paths should change from 4 to 2 rings.
To change the number of rings:
1. Type
change system-parameters coverage/forwarding and press
RETURN.
The System Parameters Call Coverage / Call Forwarding
screen appears.