Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
812Loudspeaker Paging
17
Voice Paging — TAC
This field assigns a Trunk Access Code (TAC) to a paging zone. Users dial this
code to make a page to a specific zone. One TAC must be assigned to each zone
you want to use. Two zones cannot have the same TAC. If you enter a TAC in the
ALL field, users may activate speakers in all the zones by dialing that code.
Voice Paging — COR
This field assigns a Class of Restriction to a paging zone.
Voice Paging — TN
Code Calling — TAC
This field assigns a Trunk Access Code (TAC) to a paging zone. Users dial this
code to make a page to a specific zone. One TAC must be assigned to each zone
you want to use. Two zones cannot have the same TAC. If you enter a TAC in the
ALL field, users may activate speakers in all the zones by dialing that code.
Valid entries Usage
1- to 4-digits Enter a Trunk Access Code (TAC) allowed by your dial plan.
*
May be used as first digit.
#
May be used as first digit.
blank Leave this field blank for unused paging zones.
Valid entries Usage
0
through 95. You can assign different classes of restriction to different
zones.
blank Leave this field blank for unused paging zones.
Valid entries Usage
1
to 20
(G3si/csi)
If your system uses Tenant Partitioning, you may use this field
to assign a paging zone to a specific tenant partition.
1 to 100 (G3r)
Valid entries Usage
1- to 4-digits Enter a Trunk Access Code (TAC) allowed by your dial plan.
*
May be used as first digit.
#
May be used as first digit.
blank Leave this field blank for unused paging zones.