Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
660Feature-Related System Parameters
17
DTMF Tone Feedback Signal to VRU -
Connection, Disconnection
This field appears only if DTMF Feedback Signals for VRU on the
Customer-Options System Parameters screen is
y.
Field descriptions for page 6
Screen 90. Feature-Related System Parameters screen
Send Non-ISDN Trunk Group Name as
Connected Name
Valid entries Usage
0
–9, *, #, ABCD Enter the code to connect or disconnect the VRU. This can be
a single digit, or a combination such as *99 to connect, #99 to
disconnect. The tones must be programmed at the VRU as
well.
blank Blank means that no tone is to be sent to the VRU.
Valid entries Usage
y/n
Enter y to send a name of the non-ISDN trunk group as the
connected name when a call routes from ISDN to non-ISDN
and the call is answered.
change system-parameters features Page 6 of 10
FEATURE-RELATED SYSTEM PARAMETERS
ISDN PARAMETERS
Send Non-ISDN Trunk Goup Name as Connected Name? _
Display Connected Name/Number for ISDN DCS Calls? _
Send ISDN Trunk Group Name on Tandem Calls? n
CPN Replacement for Restricted Calls: _____
CPN Replacement for Unavailable Calls: _____
QSIG TSC Extension: ___
Path Replacement with Measurements? n
MWI - Number of Digits Per AUDIX Subscriber: _
Feature Plus Ext: ___
National CPN Prefix: _____
International CPN Prefix: _____
Pass Prefixed CPN to ASAI? n
Unknown Numbers Considered Internal for AUDIX ? n Maximum Length: 5
US NI Calling Name for Outgoing Calls? n