Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
595Dial Plan Record
17
See DEFINITY ECS Administration for Network Connectivity for more
information on Uniform Dial Plans.
ETA Routing Pattern
Enter the number of the routing pattern to reach the destination switch.
UDP Extension Search Order
Appears only when Uniform Dialing Plan is
4-digit or 5-digit. Specifies the first
table to search to match a dialed extension.
First Digit Table
This table defines the dialing plan for your system. The rows in the First Digit
Table indicate what the system does when the row’s first digit is dialed. The
columns indicate how long the dialed string will be for each type of call.
The First Digit Table may have any of the following codes:
■ aar (Automatic Alternate Routing shortcut dialing) — can be entered only
if the Private Networking field and the AAR/ARS Shortcut Dialing field on
the System-Parameters Customer-Options screen are both y. When an aar
entry is used to route a call, the caller has access to all AAR features. Enter
aar
in any column but only for first digits 0 through 9 and *. You can enter
aar only once in a given row, and only
extension or attd can appear on a
row with aar.
Any extension entry that precedes
aar on the row is considered during digit
analysis. Any extension entry that follows
aar on the row cannot be dialed
directly. Instead, an AAR number must be dialed, and digit conversion
must be set up to convert the AAR number into an extension.
An attd entry can only appear in the first column and so attd can never
follow
aar. Attendant group extensions can be dialed directly, without an
access code.
Valid entries Usage
1
– 254 Enter the number of the ETA routing pattern
Valid entries Usage
local-extensions-first
Search the local Dial Plan first to match a dialed
extension.
udp-table-first
Search the UDP tables for an off-switch (UDP)
conversion.