Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
725IP Trunk Configuration Manager
17
Overview
Configuration Manager lets you configure, administer, and troubleshoot
DEFINITY ECS service in an easy-to-use tabbed interface featuring standard
Windows
®
property pages.
The following table shows Configuration Manager tabs and property pages.
Standard Command Buttons
The standard command buttons that you use as you work in Configuration
Manager are:
■ OK accepts your changes and exits Configuration Manager
■ Cancel cancels your changes and exits Configuration Manager
Configuration
Manager Tab Property page the tab displays
Info Info property page: Shows you the version and build number of the
installed DEFINITY ECS software.
Telephony Telephony property page: Displays information about the
connection between the switch and the TN802 MAPD and allows
you to configure some aspects of this connection. Also displays
information about DSP resources.
Telephony Advanced property page: Lets you adjust additional
telephony parameters.
Voice/Fax Voice/Fax property page: Allows you to view information about
the capabilities of the DSP subsystem and configure some of its
parameters.
Internet Internet property page: Allows you to adjust the connection
between the DEFINITY ECS application and the IP network for
optimal performance.
Dial/Routing Plan Dial/Routing Plan property page: Allows you to control the
routing of incoming and outgoing calls over the DEFINITY ECS
application. This is where you control access to the DEFINITY ECS
application.
Service Logs Service Logs property page: Allows you to configure the service
logging options for the DEFINITY ECS application.
Quality of Service
(QoS)
Quality of Service property page: Allows you to configure and
monitor the quality of IP service to remote switches.