Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
649Feature-Related System Parameters
17
Display Authorization Code
This field applies only to DCP, not to BRI or hybrid sets.
!
SECURITY ALERT:
To enhance your system’s security, set Display Authorization Code to
n
.
Controlled Toll Restriction Replaces
This field activates the Controlled Toll Restriction feature.
Controlled Toll Restriction Intercept Treatment
This field applies an intercept treatment to a toll call during the call processing.
Valid entries Usage
y
Enter y to allow authorization code digits to display on the set
during the dialing.
n
Enter n if these digits should not display.
Valid entries Usage
outward
station-station
none
The value that you choose for this field will be replaced by
controlled toll restriction. In other words, if you choose
station-station, you will not be able to use station-station
restrictions unless you reset this field.
Valid entries Usage
announcement
A sub-field appears to the right if announcement is used. If
the entry is
announcement, enter the assigned
announcement extension.
attendant
Intercepted calls are redirected to the attendant.
extension
A sub-field appears to the right if extension is used. If the
entry is
extension, enter the extension assigned to station or
individual attendant.
tone Intercepted calls receive intercept (siren) tone.