Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
869Route Pattern
17
No. Del. Digits
Use this field to modify the dialed number so an AAR or ARS call routes over
different trunk groups that terminate in switches with different dial plans
Inserted Digits
Enter the digits you want inserted for routing. The switch can send up to 52 digits.
This includes up to 36 digits you may enter here plus up to 18-digits originally
dialed. Special symbols count as two digits each.
Valid entries Usage
0
to 28 Enter the total number of digits you want the system to delete
before it sends the number out on the trunk. Use for calls that
route:
■ to or through a remote switch
■ over tie trunks to a private network switch
■ over Central Office (CO) trunks to the serving CO
Valid
entries Usage
(0 to 9)
0 to 36
digits
Enter the digits you want inserted for routing.
* When * is in the route pattern and the outgoing trunk is signaling
type “mf”, the MFC tone for the “end-of-digits” is sent out to the
CO in place of the *.
# When # is in the route pattern and the outgoing trunk is signaling
type “mf”, the MFC tone for the “end-of-digits” is sent out to the
CO in place of the #.
‘
,’ Use 2 places. Creates a 1.5 second pause between digits being sent.
Do not use as the first character in the string unless absolutely
necessary. Misuse can result in some calls, such as Abbreviated
Dialing or Last Number Dialed, not completing.
+ Wait for dial tone up to the Off Premises Tone Detection Timer
and then send digits or intercept tone based on Out Pulse Without
Tone y/n on the Feature-Related System Parameters screen.
% Start End-to-End Signaling.
! Wait for dial tone without timeout and then send DTMF digits.
& Wait for ANI (used for Russian pulse trunks)