Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Routing outgoing calls
182Setting up multiple locations
8
2. Use the arrow keys to move to a blank Dialed String field.
3. Enter
411 in the Dialed String field.
4. Enter
3 in the Total Mn and 3 in Total Mx fields.
5. Enter
1 in the Route Pattern field.
6. Enter
svcl (service call) in the Call Type field.
7. Press
ENTER to save your changes.
Setting up multiple locations
When you define location numbers for the cabinets in a switch, you can create
numbering plans and time zone and daylight savings plans that are specific for
each cabinet. Choose the location you want to use as your main location, and
offset the system clock time on each cabinet according to their its location.
Before you start
Be sure the Multiple Locations field on the System-Parameters Customer-Options
screen is set to
y. If this field is set to n, contact your Lucent representative for
more information.
Be sure your daylight savings rules are administered. Daylight Savings Rule
numbers are located on the Daylight Savings Rule Screen
Each cabinet in a switch and each port network in the cabinet must be assigned a
location number. Refer to the maintenance information for your switch for more
information.
Instructions
For example, let’s set up multiple locations for a switch with cabinets in Chicago
and New York. Location 1 is assigned to the cabinet in Chicago, our main office,
so Central Standard Time is used for our main location. Location 2 is assigned to
ARS DIGIT ANALYSIS TABLE
Location: all Percent Full: 6
Dialed Total Route Call Node ANI
String Min Max Pattern Type Num Req
411__________________3_ 3 ___ 1 svcl ___ n
5____________________7 _ 7 ____ 2 hnpa ___ n
6____________________7 _ 7 ____ 2 hnpa ___ n
7____________________7 _ 7 ____ 2 hnpa ___ n
911__________________3 3 ____ 1 svcl ___ n