Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Introduction to the DEFINITY system
35Other useful settings
2
6. In the Retry Interval (sec) field, type 30.
This is length of time between retries.
7. In the Main Number field, type the number that is to be displayed at the end
of the pager message.
We’ll type
303-555-0800.
8. In the Pager Number field, type the number for the pager.
We’ll type
303-555-9001.
9. In the Pin Number field, type
pp77614567890.
This is the PIN number, if required, for the pager. Insert any pause digits
(pp) as needed to wait for announcements from the pager service to
complete before sending the PIN.
10. In the DTMF Duration - Tone (msec) field, type
100.
This is the length of time the DTMF tone is heard for each digit.
11. In the Pause (msec) field, type
100.
This is the length of time between DTMF tones for each digit.
12. Press
ENTER to save your changes.
Related topics
Refer to ‘‘
Crisis Alert’’ on page 1313 for more detailed information.
Other useful settings
There are many settings that control how your system operates and how your users
phones work. Most of these you administer through one of the System Parameters
screens. This section describes a few of the items you can enable in your system to
help your users work more efficiently. See ‘‘
Feature-Related System Parameters’’
on page 632 for a more detailed description of the available system settings.
Automatic callback if an extension is busy
You can allow users to request that the system call them back if they call a user
whose telephone is busy. See ‘‘
Automatic Callback’’ on page 1159.