Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Managing phone features
65Telephone feature buttons
4
cas-backup CAS
Backup
Centralized Attendant Service Backup:
used to redirect all CAS calls to a backup
extension in the local branch if all RLTs
are out-of-service or maintenance busy.
The associated status lamp indicates if
CAS is in the backup mode.
1 per
station
cdr1-alrm CDR 1
Failure
CDR Alarm: associated status lamp is
used to indicate that a failure in the
interface to the primary CDR output
device has occurred.
1 per
station
cdr2-alrm CDR 2
Failure
CDR Alarm: associated status lamp is
used to indicate that a failure in the
interface to the secondary CDR output
device has occurred.
1 per
station
cfwd-bsyda Call
Forwarding
bsyda (Ext)
Call Forward Busy/Don’t Answer:
activates and deactivates call forwarding
for calls when the extension is busy or the
user does not answer.
check-in Check In Check In (display button): changes the
state of the associated guest room to
occupied and turns off the outward calling
restriction for the guest room’s station.
1 per
station
check-out Check Out Check Out (display button): Changes the
state of the associated guest room to
vacant and turns on the outward calling
restriction for the guest room’s station.
Also clears (removes) any wake-up
request for the station.
1 per
station
clk-overid Clocked
Override
Clocked Manual Override (display
button): used in association with Time of
Day Routing to override the routing plan
in effect for the activating user. The
routing plan is overridden for a specified
period of time.
1 per
station
Table 1. Telephone feature buttons —
Continued
Button name
Button
label Description Maximum
Continued on next page