Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
837Multifrequency-Signaling-Related System Parameters
17
Screen 167. Multifrequency-Signaling-Related System Parameters screen
Tones to CO on Outgoing Forward Calls —
Group I
Message codes 11 to 15 appear. (Numbers 1 through 10 are assigned to the digits
of the destination telephone number.)
Tones to CO on Outgoing Forward Calls —
Group II
Message codes between 1 and 15 display. Assign a meaning to each code. Each
entry can only appear once in the group II column.
Valid entries Usage
end-of-digits
Assign a meaning to each code. Refer to ‘‘Definitions of Group
I, II, A, and B signals’’ on page 839 for signal type.
ani-avail,
end-of-ani
ani-not-avail
.
change system-parameters multifrequency-signaling Page 4 of 4
MULTIFREQUENCY-SIGNALING-RELATED SYSTEM PARAMETERS
OUTGOING FORWARD SIGNAL TYPES OUTGOING BACKWARD SIGNAL TYPES
(Tones to CO) (Tones from CO)
Group-I Group-II Group-A Group-B
11: ______________ 2: normal 1: next-digit 1: free
12: ______________ 5: attendant 2: congestion 2: busy
13: ______________ 6: data-call 3: end-of-dial 3: congestion
14: ______________ __: ______________ 4: congestion 4: congestion
15: ______________ __: ______________ 5: call-info-ani 5: congestion
__: ______________ 6: congestion 6: free
__: ______________ 7: last-2-digits 7: intercept
__: ______________ 8: last-3-digits 8: congestion
__: ______________ 9: congestion 9: congestion
__: ______________ 10: congestion 10: congestion
__: ______________ 11: congestion 11: congestion
__: ______________ 12: congestion 12: congestion
__: ______________ 13: congestion 13: congestion
__: ______________ 14: congestion 14: congestion
__: ______________ 15: congestion 15: congestion