Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Introduction to the DEFINITY system
33Receiving notification in an emergency
2
Finally, we make sure that all security personnel and the attendant will have to
acknowledge the alert.
11. Type
change system-parameters crisis-alert and press RETURN.
The ‘‘
Crisis Alert System Parameters’’ screen appears.
12. Go to the Every User Responds field and type
y.
13. Press
ENTER to save your changes.
More information
Attendants cancel an alert by pressing the crisis alert button three times. The first
button push turns off the siren, the second stops the lamp from flashing, and the
third clears the display.
Digital phone users cancel the siren by pushing the crisis alert button. If you have
set the system so that only one user needs to respond, this stops the alerting at all
phones. If all users must respond, each phone continues to alert until that user
presses the crisis alert button to acknowledge the alarm. The emergency caller’s
name and extension remain on the display at this point. To completely cancel an
alert and clear their displays, users press the Normal button.
Once you administer Crisis Alert, the switch still records each emergency call and
sends a record to the journal printer, if available. If not, you can view the
emergency log with the command
list emergency.
Related topics
Refer to ‘‘
Crisis Alert’’ on page 1313 for more detailed information.
For information on other ways to reach the attendant in an emergency, refer to
‘‘
Emergency Access to the Attendant’’ on page 1323.
To determine what types of digital phones have displays, refer to ‘‘
Phone
reference’’ on page 1065.
To ensure that you can still make necessary phone calls in an emergency, refer to
‘‘
Emergency Transfer’’ on page 1326.