Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
890Station
17
Coverage After Forwarding
This field governs whether an unanswered forwarded call is provided coverage
treatment.
Coverage Msg Retrieval
Applies if the phone is enabled for LWC Reception.
Coverage Module
Coverage Path 1 or Coverage Path 2
Enter a coverage-path number or time-of-day table number from a
previously-administered Call Coverage Path screen or Time of Day Coverage
Table screen.
NOTE:
If Modified Misoperation is active (Misoperation Alerting is y on the
Feature-Related System Parameters screen), you must assign a Coverage
Path to all stations on the switch.
Valid entries Usage
y
Coverage treatment is provided after forwarding regardless of
the value of the Coverage After Forwarding field on the
System Parameters - Call Coverage/Call Forwarding screen.
n
No coverage treatment is provided after forwarding regardless
of the value of the Coverage After Forwarding field on the
System Parameters - Call Coverage/Call Forwarding screen.
s(ystem)
Indicates that call processing uses the Coverage After
Forwarding field on the ‘‘
System Parameters Call Coverage /
Call Forwarding’’ screen. To override the system-wide
parameter for a given station, set this field to
y or n.
Valid entries Usage
y/n
Enter y to allow users in the phone’s Coverage Path to retrieve
Leave Word Calling (LWC) messages for this phone.
Valid entries Usage
y
Enter y to indicate that a coverage module is connected to the
station. Once you enter y, the system displays an additional
page that allows you to assign the buttons for the module.