Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Features and technical reference
1258Call Detail Recording
20
If the trunk-group CDR Reports field is set to ring, CDR records the ring
time to answer or abandon for incoming calls originated by the trunk
group. In addition, CDR indicates if the incoming destination is busy. This
record is separate from the normal call duration record printed for an
answered call. This information is indicated by the condition code.
When an incoming call originated by a trunk group with this option set is
terminated to an internal destination, the call is tracked from the time
ringing feedback is given to the originator. If the call is answered, a CDR
record is printed with the condition code “G” and the duration reflects the
time between the start of ringing and the answer of the call. If the call is
abandoned before being answered, the system prints a record with the
condition code “H” and the duration reflects the time between the start of
ringing and the time the call was abandoned. If the destination is busy, a
CDR record is printed with the condition code “I” and a duration of 0.
■ Condition Code overrides
If two condition codes apply to the same call, one code overrides the other.
The matrix below, Table 46
, defines the overrides. To use this matrix,
assume that condition codes 7 and A apply to the same call. To find the
condition code that overrides, look at the point of where row 7 intersects
column A (or where row A intersects column 7). In this case, condition
code 7 overrides.
H Indicates that a ringing call has been abandoned.
I Indicates a call terminated to a busy station.
J Indicates an incoming trunk call that is a new connection using ANF-PR
(Additional Network Feature–Path Replacement, see QSIG) or DCS with
Rerouting.
K Indicates an outgoing trunk call that is a new connection using ANF-PR
(Additional Network Feature–Path Replacement, see QSIG) or DCS with
Rerouting.
Table 45. Condition Codes —
Continued
Condition
Codes Description
Continued on next page