Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Managing multimedia calling
252Understanding the multimedia complex
9
provide dialtone after the first address has been completed. The user now
dials the second destination address digits. The destination address may be
provided by dialing digits, using abbreviated dial entries, last number
dialed, etc. After the 2nd address has been collected the mm-multinbr
status lamp will go off.
Originating a multimedia call with the mm-multinbr button will originate a
call according to the Default Multimedia Parameters selected on the
System Parameters Features form. This default parameter will be either
2x56 or 2x64. The bearer capability of the multimedia calls will either be
56K or 64K and the bandwidth will be 2B channels.
NOTE:
The mm-multinbr feature button is generally used by stations that are
part of an Enhanced multimedia complex, but may be used by any
station to originate a dual address multimedia call.
5.
Multimedia Multi-number Call feature Access Code. For stations that do
not have an administered mm-multinbr button, the Multimedia
Multi-number call feature access code may be used instead. It allows
origination of a multimedia call from a voice station. It is used when the
destination being dialed requires a different address for each of the 2
B-channels. An example of this is Central Office provided ISDN-BRI. This
type of BRI line is provisioned with separate listed directory numbers for
each B-channel. In order to make a 2B multimedia call to such a device,
two sets of addresses must be entered.
The user goes off-hook and dials the MM-multinbr feature access code.
Upon dialing of the MM-multinbr FAC, the mm-call (if present) status
lamp (green led) should become solid. The user now dials the first
destination address digits. The destination address may be provided by
dialing digits, using abbreviated dial entries, last number dialed, etc. The
system will provide dialtone after the first address has been completed. The
user now dials the second destination address digits. The destination
address may be provided by dialing digits, using abbreviated dial entries,
last number dialed, etc.
Originating a multimedia call with the MM-multinbr FAC will originate a
call according to the Default Multimedia Parameters selected on the
System Parameters Features form. This default parameter will be either
2x56 or 2x64. The bearer capability of the multimedia calls will either be
56K or 64K and the bandwidth will be 2B channels.
NOTE:
The mm-multinbr FAC is generally used by stations that are part of an
Enhanced multimedia complex, but may be used by any station to
originate a dual address multimedia call.