Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
598Digit Absorption
17
Digit Absorption
This screen implements up to 5 digit absorption lists. The screen may be required
for each CO and FX trunk group connected to a step-by-step CO. Each outgoing
digit string from the switch to the step-by-step CO is treated according to entries
in the “Absorption Treatment Assignment” section of the screen.
NOTE:
If the Expected Digits field on the Trunk Group screen is blank, you cannot
administer Digit Absorption.
Field descriptions for page 1
Screen 71. Digit Absorption
List Number
Displays the Digit Absorption List number (
0 through 4). The list number is
referenced from a field entry on the associated trunk group.
Absorption Treatment Information
This is a display-only section. It shows how Digit Absorption treats each digit, 0
through 9, depending on the assignment of A through C for Group I, and A, D, E,
and F for Group II. Enter the assignment on the next section on the screen.
change digit absorption Page 1 of 1
DIGIT ABSORPTION
List Number: __
ABSORPTION TREATMENT INFORMATION (All selections must be from same group)
Choice Meaning
Group I. A Digit not absorbed.
B Digit absorbed repeatedly.
C Digit absorbed once with no further absorption.
Group II. A Digit not absorbed.
D Digit absorbed only if it is the first digit.
E Digit absorbed only if it is the second digit and
the first digit was already absorbed.
F Digit asorbed only if it is the first or second digit.
ABSORPTION TREATMENT ASSIGNMENT (select treatment (A-F) for each digit below)
0: A 2: A 4: A 6: A 8: A
1: A 3: A 5: A 7: A 9: A