Lucent Technologies 8.2 Security Camera User Manual


  Open as PDF
of 1707
 
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Features and technical reference
1270Call Detail Recording
20
Automatic Callback
When the Automatic Callback feature is used for an intraswitch call, no
CDR record is generated for the first call attempt or the ringback. However,
if the caller or extension being called is optioned for intraswitch CDR, a
record of the actual call is output provided the call is answered and
completed.
Automatic Circuit Assurance
ACA calls generate intraswitch CDR if the terminating extension is
monitored by CDR. The originating extension for ACA calls cannot be
administered for intraswitch monitoring.
Automatic Wakeup
No CDR intraswitch records are generated for wakeup calls.
Bridged Call Appearance
CDR does not record any information on the party who bridges onto a call.
Instead, the number that was called appears in the Dialed Number field of
the CDR record. The duration of the call is recorded when the last party
drops off the call. This also applies for intraswitch calls.
If the user originates a call over a bridged appearance, the call record
contains the calling number of the bridged appearance extension and not
the extension number of the original, calling station.
Busy Verification of Terminals and Trunks
An attendant or user is never required to enter an account code when
making a busy verification.
Call-by-Call Service Selection
When a successful call is made on a Call-by-Call Service Selection trunk,
the network specific facility used on the call is translated into an INS
number and recorded in the INS field of the call record. If a Call-by-Call
Service Selection call is unsuccessful because of an administered trunk
usage allocation plan, the INS number is recorded in the INS field of the
report with a condition code of “E.”
Call Coverage
When an incoming or intraswitch call is answered by a covering extension,
the extension number dialed by the originating party is recorded as the
dialed number. If a call is covered to an off-net location, the dialed number
is the number of the off-net location, the calling number is the number of
the station that is covered to the remote location.