Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Setting up telecommuting
289Setting up Personal Station Access
10
b. (Optional) Type y on the Record PSA/TTI Transactions in History
Log field.
These fields display only when the Terminal Translation
Initialization (TTI) Enabled field on this screen is set to y.
3. Type
change cos and press RETURN.
The Class of Service
screen appears.
4. Type
y in the Personal Station Access (PSA) 1 field and press ENTER.
5. Type
change feature-access-codes and press RETURN.
The Feature Access Code (FAC) screen appears.
6. Complete the following fields and press
ENTER.
a. Type
#4 in the Personal Station Access (PSA) Associate Code field.
This is the feature access code you will use to activate Personal
Station Access at a phone.
b. Type
#3 in the Dissociate Code field.
This is the feature access code you will use to deactivate Personal
Station Access at a phone.
More information
You can allow users to place emergency and other calls from phones that have
been dissociated. To enable this, you must first assign a class of restriction (COR)
for PSA-dissociated phones. You do this on the ‘‘
Feature-Related System
Parameters’’ screen. In addition, you must set the restrictions for this COR on the
‘‘
Class of Restriction’’ screen.
If you want users to be able to place emergency calls from dissociated phones, it is
also a good idea to have the system send calling party number (CPN) or automatic
number identification (ANI) information for these calls. To do this, you must set
the CPN, ANI for PSA Dissociated Sets field to y on the ‘‘
Feature-Related System
Parameters’’ screen.
Related topics
Refer to ‘‘
Training users’’ on page 301 for information on how to associate or
disassociate PSA.