Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
1018Trunk Group
17
Outgoing Disconnect Send (msec)
This field is administrable only if the Trunk Signaling Type field is
dis and the
trunk group Direction field is
two-way or outgoing. Only TN2140 ports receive
this timer.
Seize Ack Send (msec)
This field appears only if the Trunk Signaling Type field is
dis and the trunk group
Direction field is
incoming or two-way. Only TN2140 ports receive this timer.
Incoming Disconnect Send (msec)
This field is only administrable if the Trunk Signaling Type field is
dis and the
trunk group Direction field is
incoming or two-way. Only TN2140 ports receive
this timer.
Tone (msec)
This field appears only if the Trunk Signaling Type field is blank. All CO, DIOD,
and Tie circuit packs that accept administrable timers accept this timer. This timer
is also sent to the following circuit packs: TN464B (or later), TN767, TN436B,
TN459B, TN2146, TN2199, TN429, TN2184 ports in a DID trunk group.
Valid entries Usage
100
to 9900 in
increments of
100
Enter the duration of the forward release signal your switch
sends at the end of outgoing calls.
Valid entries Usage
10
to 990 in
increments of
10
Enter the duration of the seizure acknowledgment signal your
switch sends in response to an incoming seizure.
Valid entries Usage
500
to 1200 in
increments of
100
Enter the duration of the backward release signal your switch
sends at the end of an incoming call.
Valid entries Usage
20
to 2550 in
increments of
10
Enter the duration of a DTMF tone sent when a button on a
hybrid phone is pressed.