Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
811Loudspeaker Paging
17
CDR
This field determines whether CDR data is collected for the paging ports.
Voice Paging Timeout (sec)
This field limits the duration of voice pages. When this interval ends, calls are
disconnected. To determine the best setting, time the typical pages you expect to
broadcast and then add another 4 to 5 seconds.
Code Calling Playing Cycles
This field sets the number of times a chime code will play when a user makes a
chime page. To determine the best setting, consider who your code calling users
are and whether they are likely to hear the code chime the first time.
Port
This field assigns a port on an auxiliary trunk circuit pack to a paging zone.
NOTE:
To use a port that has no hardware associated with it, place an ’X’ in this
field.
Valid entries Usage
y/n
Enter y if you want the switch to collect CDR data on the
paging ports.
Valid entries Usage
10
to 600
seconds.
Enter the maximum number of seconds you want any page to
last.
blank The field may not be blank when you administer voice paging.
Valid entries Usage
1
to 3 Enter the number of times you want the chime code to play
when a user makes a page.
blank The field may not be blank when you administer chime paging
(code calling).
Valid entries Usage
a port ID Assign an available port to each zone you want to use. You
cannot assign the same port to different zones.
blank Leave this field blank for unused paging zones.