Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
886Station
17
Att. Call Waiting Indication
Attendant call waiting allows attendant-originated or attendant-extended calls to a
busy single-line phone to wait and sends distinctive call-waiting tone to the
single-line user.
Audible Message Waiting
The Audible Message Waiting tone indicates that the user has a waiting message.
This field appears only if Audible Message Waiting is set to
y on the
System-Parameters Customer-Options screen.
Note that this field does not control the Message Waiting lamp.
Audix Name
Specifies which AUDIX is associated with the station.
Auto Answer
In EAS environments, the auto answer setting on the Agent LoginID screen may
override a station’s setting when an agent logs in there.
NOTE:
For analog stations, if Auto Answer is acd and the station is off-hook and
idle, only the ACD split/skill calls and direct agent calls auto answer;
non-ACD calls receive busy treatment. If the station is active on an ACD call
and a non-ACD call arrives, the Agent receives call-waiting tone.
Valid entries Usage
y/n
Enter y to assign Attendant Call Waiting to the phone.
You should not set this field to y, if the Data Restriction field is
y or the Switchhook Flash field is n, or if Data Privacy is
enabled for the phone’s class of service (COS). If any of these
conditions are true, the phone cannot accept or handle call
waiting calls.
Valid entries Usage
y/n
Enter y if you want the phone user to receive stutter dial tone
when they have a waiting message and they go off-hook.
Valid entries Usage
Names assigned
to an AUDIX
adjunct
Must contain a user-defined adjunct name that was previously
administered in the Node-Names screen.