Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Features and technical reference
1457PC Interface
20
specific features depends on the COS of the extension and the COS for the switch.
Modem Pooling is provided to ensure general availability of off-net data-calling
services.
Security
There are two areas where unauthorized use may occur with this feature:
unauthorized local use and remote access.
!
SECURITY ALERT:
Unauthorized local use involves unauthorized users who attempt to make
calls from a PC. The PC software has a security setting so users can place
the PC in Security Mode when it is unattended. You can also assign
Automatic Security so that the administration program on the PC is always
active and runs in Security Mode. This mode is password-protected.
!
SECURITY ALERT:
Remote access involves remote access to the PC over a data extension.
Remote users can delete or copy PC files with this feature. You can
password-protect this feature. Consult the BCS Product Security Handbook
for additional steps to secure your system and to find out about obtaining
information regularly about security developments.
Considerations
■ Use the Function Key Module of the 7405D with PC Interface.
■ BRI terminals normally are initializing terminals and require you to assign
an SPID. The PC/ISDN Platform (Group 2), in a stand-alone configuration,
is a noninitializing BRI terminal and does not require you to assign a SPID.
— Set a locally-defined terminal type with General Terminal
Administration
— Define the terminal type as a noninitializing terminal that does not
support Management Information Messages (MIM).
— Assign the PC/ISDN Platform with an associated (initializing)
ISDN-BRI phone (such as an ISDN 7505) using a SPID.
— Assign the station (using a locally-defined terminal type) to take full
advantage of the capabilities of the PC Interface. This terminal type
is also noninitializing with no support of MIMs.