Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Managing data calls
392Data Call Setup
15
Once you have connected these data devices to the switch, you can use networking
and routing capabilities to allow them to communicate with other devices over
your private network or the public network.
This section describes the system features available to enable data
communications.
Data Call Setup
Data Call Setup provides multiple methods to set up a data call:
■ Data-terminal (keyboard) dialing
■ Telephone dialing
■ Hayes AT command dialing
■ Administered connections
■ Hotline dialing
Administering Data Call Setup
For data-terminal dialing:
1. Choose one of the following data modules and administer all fields:
■ Processor/Trunk Data Module
■ Data Line Data Module
■ 7500 Data Module
2. On the Modem Pool Group screen, administer the Circuit Pack
Assignments field.
Refer to ‘‘
Modem Pool Group’’ on page 817 for more information.
For telephone dialing:
1. Choose one of the following:
■ On the Feature Access Code screen, administer the Data Origination
Access Code field. Refer to ‘‘
Feature Access Code’’ on page 619 for
more information.
■ On the Station screen, assign one button as data-ext (Ext:). Refer to
‘‘
Station’’ on page 882 for more information.
2. Choose one of the following data modules and administer all fields:
■ Processor/Trunk Data Module
■ Data Line Data Module