Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
455AAR and ARS Digit Conversion Table
17
Node Number
ANI Reqd
AAR and ARS Digit Conversion Table
Your system uses the AAR or ARS Digit Conversion Table to change a dialed
number for more efficient routing. Digits may be inserted or deleted from the
dialed number. For instance, you can tell the switch to delete a 1 and an area code
on calls to one of your locations, and avoid long-distance charges by routing the
call over your private network.
lpvt
local private normal
natl
non-NANP normal
npvt
national private normal
nsvc
national service normal
op
operator attendant
pubu
public-network number (E.164)-unknown normal
svcl
national(2) toll-auto
svct
national(2) normal
Valid entries Usage
1
to 999 Enter the number of the destination node in a private
network if you are using node number routing or DCS. If
you complete this field, leave the Route Index field blank.
Valid entries Usage
y/n
Enter y if ANI is required on incoming R2-MFC or Russian MF
ANI calls. This field applies only if the Request Incoming ANI
(non-AAR/ARS) field on the Multifrequency-Signaling-Related
System Parameters screen is
n.
r
Allowed only if “Allow ANI Restriction on AAR/ARS is y on
Feature Related System Parameters” screen. Use to drop a call
on a Russian Shuttle trunk or Russian Rotary trunk if the ANI
request fails. Other types of trunks treat
r as y.
Valid
entries Usage
China # 1
Call Type