Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
823Multifrequency-Signaling-Related System Parameters
17
Multifrequency-Signaling-Related
System Parameters
This screen sets the system parameters associated with multifrequency signaling.
Screen 164 on page 823
appears when Incoming Call Type is group-ii-mfc and
Outgoing Call Type is
none. Screen 165 on page 831 appears when both
Incoming Call Type and Outgoing Call Type are
group-ii-mfc.
Screen 164. Multifrequency-Signaling-Related System Parameters
The ANI Prefix, ANI for PBX, and Collect All Digits Before Seizure fields appear
only when the value of the Outgoing Call Type field is
group-ii-mfc or mfe.
If Collect All Digits Before Seizure is
y, Overlap Sending on Link-to-Link
Tandem Calls and Convert First Digit End-of-ANI are not displayed.
change system-parameters multifrequency-signaling Page 1 of 4
MULTIFREQUENCY-SIGNALING-RELATED SYSTEM PARAMETERS
Incoming Call Type: ANI Prefix:
Outgoing Call Type: ANI for PBX:
Maintenance Call Type: NEXT ANI DIGIT
Test Call Extension: Incoming:
Interdigit Timer (sec): Outgoing:
Maximum Resend Requests: _
Received Signal Gain (dB): _
Transmitted Signal Gain (dB): -
Request Incoming ANI (non-AAR/ARS)?
Outgoing Forward Signal Present Timer (sec):
Outgoing Forward Signal Absent Timer (sec):
Multifrequency Signaling Incoming Intercept Treatment?
Collect All Digits Before Seizure?
Overlap Sending on Link-to-Link Tandem Calls?
Private Group II Permissions and Public Interworking?
Convert First Digit End-of-ANI To: _
Group II Called Party Category:
Use COR for Calling Party Category?
Outgoing Shuttle Exchange Cycle Timer (sec):