Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Managing group communication
386Using phones as intercoms
14
4. On row 1, type 1 in the DC field.
This is the code a user will dial to make an intercom call to extension 2010.
The length of this code must exactly match the entry in the Length of Dial
Code field.
5. Repeat steps 3 and 4 for the remaining extensions.
Dial codes don’t have to be in any order. The switch fills in the Name field
with the name from the Station screen when you save your changes.
6. Press
ENTER to save your changes.
To allow users to make intercom calls, you must administer feature buttons on the
phones in the intercom group. You can administer buttons for dial intercom,
automatic intercom, or both on multi-appearance phones. You can’t administer
either intercom feature on single-line phones, but you can assign single-line
phones to intercom groups so those users can receive intercom calls.
As an example, let’s set up automatic intercom between extensions 2010 (dial
code = 1) and 2011 (dial code = 2) in intercom group 1.
To set up automatic intercom between extensions 2010 and 2011:
1. Type
change station 2010 and press RETURN.
The Station
screen appears.
2. Move to the page with the Button Assignments fields.
3. In Button Assignments field 4, type
auto-icom and press TAB .
The Grp and DC fields appear.
STATION
SITE DATA
Room: _______ Headset? n
Jack: _____ Speaker? n
Cable: _____ Mounting: d
Floor: _______ Cord Length: 0
Building: _______ Set Color: ______
ABBREVIATED DIALING
List1: ________ List2: ________ List3: ________
BUTTON ASSIGNMENTS
1: call-appr_ 6: __________
2: call-appr_ 7: __________
3: call-appr_ 8: __________
4: auto-icom_ Grp: 1 DC: 2 9: __________
5: dial-icom_ Grp: 1 10: __________