Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
505Call Vector
17
Prompting
A display-only field indicating whether, on the System-Parameters
Customer-Options screen, the Vectoring (Prompting) field is
y.
LAI
A display-only field indicating whether Look-Ahead Interflow is enabled.
G3V4 Adv Route
A display-only field indicating whether you can use the G3V4 Advanced Vector
Routing commands.
CINFO
A display-only field indicating whether, on the System-Parameters
Customer-Options screen, the Vectoring (CINFO) field is
y.
BSR
A display-only field indicating that on the System-Parameters Customer-Options
screen, the Vectoring (Best Service Routing) field is
y. Thus, you can use BSR
commands and command elements in your vectors. An
n indicates that the BSR
option is not enabled.
01 through XX
Enter vector commands as required (up to the maximum allowed in your
configuration). For more information, refer to DEFINITY ECS Call Vectoring/EAS
Guide or DEFINITY BCS and Guestworks Call Vectoring Guide.
Valid entries Usage
adjunct
Causes a message to be sent to an adjunct requesting routing
instructions.
announcement
Provides the caller with a recorded announcement.
busy
Gives the caller a busy signal and causes termination of
vector processing.
check
Checks the status of a split (skill) for possible termination of
the call to that split (skill).
collect
Allows the user to enter up to 16 digits from a touch-tone
phone, or allows the vector to retrieve Caller Information
Forwarding (CINFO) digits from the network.