Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Routing outgoing calls
175Displaying ARS analysis information
8
Instructions
To assign the ARS FAC:
1. Type
change dialplan and press ENTER.
The Dial Plan Record
screen appears.
2. Move to the 9 row and type
fac in the first column. Press ENTER to save
your changes.
3. Type
change features and press ENTER.
The Feature Access Code
screen appears.
4. Type
9 in the ARS - access code field and press ENTER to save your
changes.
Displaying ARS analysis information
Instructions
You’ll want to become familiar with how your system currently routes outgoing
calls. To display the ARS Digit Analysis Table that controls how the system routes
calls that begin with 1:
1. Type
display ars analysis 1 and press RETURN.
The ARS Digit Analysis Table for dialed strings that begin with 1 appears.
Note that the switch displays only as many dialed strings as can fit on one
screen at a time.
To see all the dialed strings that are defined for your system, run an ARS Digit
Analysis report:
1. Type
list ars analysis and press RETURN.
The ARS Digit Analysis Report appears. You may want to print this report
to keep in your paper records.
Understanding ARS analysis
With ARS, the switch checks the digits in the number called against the ARS
Digit Analysis Table to determine how to handle the dialed digits. Your switch
also uses Class of Restriction (COR) and Facility Restriction Level (FRL) to
determine the calling privileges.
Let’s look at a very simple AAR and ARS Digit Analysis Table
. Your system
likely has more defined dialed strings than our example.