Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
573Data modules
17
Hot Line Destination — Abbreviated Dialing Dial
Code
Used with 7500, Data Line, Netcon, Processor/Trunk, Processor Interface, and
World Class BRI Data Modules. Appears only when the Special Dialing Option
field is
hot-line. Entry in this field supports Data Hot Line.
Default Dialing Abbreviated Dialing Dial Code
Only appears when the Special Dialing Option field is
default. When the user
goes off-hook and enters a carriage return following the DIAL prompt, the system
dials the AD number. The data call originator can also perform data-terminal
dialing by specifying a dial string that may or may not contain alphanumeric
names.
CIRCUIT SWITCHED DATA ATTRIBUTES
Used with 7500 and World Class BRI Data Modules.
NOTE:
These fields represent defaults needed for modem pooling conversion
resource insertion when the endpoint does not support data query
capability and administered connections. These fields have no
significance for data modules providing data query [all Lucent
Technologies-supported ISDN-BRI data modules (7500 and ADM)].
For Lucent Technologies ISDN-BRI or World Class ISDN-BRI data
modules, use the default settings.
Default Duplex
Used with 7500 and World Class BRI Data Modules. Used to identify the duplex
mode.
Valid entries Usage
0-999
This number is associated with the AD List. When the user
goes off-hook on a Data Hot Line call, the system dials the AD
number.
Valid entries Usage
0-999
Enter a list number associated with the abbreviated dialing list.
Valid entries Usage
full
Allows simultaneous two-way transmission.
half
Allows only one transmission direction at a time.