Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Enhancing system security
329Setting up security violations notification
11
2. In the SVN Login Violation Notification Enabled field, type y.
This sets Security Violations Notification login violation notification.
3. In the Originating Extension field, type
3040.
This becomes the phone extension for the purpose of originating and
identifying SVN referral calls for login security violations.
4. In the Referral Destination field, type
attd to send all calls to the attendant.
This is the phone extension that receives the referral call when a security
violation occurs.
5. In the Login Threshold field, type
3.
This is the minimum number of login attempts that are permitted before a
referral call is made. More than 3 attempts causes a security violation
notification.
6. In the Time Interval field, type
0:03.
This the time interval in which the threshold, or number of violations, must
occur.
7. Press
ENTER to save your changes.
NOTE:
The following 3 steps are optional. If you are not using Remote
Access, go to step 11
.
8. Type
change remote-access and press RETURN.
The Remote Access
screen appears.
SECURITY-RELATED SYSTEM PARAMETERS
SECURITY VIOLATION NOTIFICATION PARAMETERS
SVN Login Violation Notification Enabled? y
Originating Extension: 3040_ Referral Destination: attd_
Login Threshold: 3_ Time Interval: 0:03
Announcement Extension: _____
SVN Remote Access Violation Notification Enabled? y
Originating Extension: 2719_ Referral Destination: 2720_
Barrier Code Threshold: 3 Time Interval: 0:03
Announcement Extension: _____
SVN Authorization Code Violation Notification Enabled? y
Originating Extension: 3030_ Referral Destination: 3031_
Authorization Code Threshold: 3 Time Interval: 0:03
Announcement Extension: _____